Components

Broadband DC Blocks

Outer DC blocks have a capacitor in-series with the outer conductor and the inner/outer types have capacitors in-series.

TEST1

Reflector Antennas

Octave Horn Antennas

Multi Octave Horn Antennas

Horn Antennas

Spiral Antennas

Microstrip Antennas

Log Periodic Antennas

Discone-type Antennas

Bi-Conical Antennas

Directional Finding Antennas

dbDirect Broadband Antennas

Horn Antennas

WG Calibration – CLKA1

Designed to provide accurate TRL (Thru-Reflect-Line) calibration of VNA for measurement in rectangular waveguide from WR975 to WR10

WG Calibration – CLKA2

Two Precision Fixed Loads Calibration support TRL and SSLT calibration method. Waveguide from WR975 to WR10

WG Calibration – CLKA5 Kits

Sliding Load Calibration support SSLT and SSL calibration method. Waveguide from WR430 to WR28

WG Calibration – CLKB1 Kits

Sliding Load Calibration, Short-Short-Load-Through (SSLT) calibration method using offset short. Waveguide from WR430 to WR28

WOMT Series

Ortho-Mode Transducers are covering full or sub waveguide band from WR340 to WR5 up to 220GHz.

Series 136/137

Millimetric Multihole Directional Coupler, 33 to 500GHz, 40dB (136) and 44dB (137) directivity

Rotary Vane Phase Changers

Flann Series 063 | Direct Reading | 0 to 360° Continuous Phase Change | Low Insertion Loss

Calibrated Phase Changers

Series 060 and 061 | 0 – 180° Calibrated Phase | Low Insertion Loss | 1.14 to 330GHz

Programmable Rotary Vane Phase Changers

Series 670 | 3.22 to 500GHz | 0.2 degree increments | 1480 degrees per second

NW346

Broadband Calibrated Coaxial Noise Sources, available in 6,15 and 23 dB ENRs

NW-W Millimeter Waveguide Sources

Noise Sources Millimeter Waveguide Bands, available up to 110 GHz (W-band).

NW-MI Series

An economical and rugged manual noise instrument NW-MI series

NW-ATE Series

An economical and rugged noise instrument

Programmable 2.5GHz RF over Fiber

Low frequency RFoF modules up to S band (up to 2.5GHz)

Programmable 2.5GHz RFoF for GPS Applications

Up to S band (up to 2.5 GHz). Supports 0.15GHz to 2.5GHz for GPS and GNSS.

3.0GHz RF over Fiber

Low frequency RFoF modules. Up to S band(up to 3GHz)

4.0GHz RF over Fiber

Low frequency RFoF modules. Up to S band (up to 4GHz)

6.0GHz RF over Fiber

Low frequency RFoF modules, Up to C band (up to 6GHz)

12GHz HSFDR RFoF Modules

Up to X band (up to and including 12GHz)

18GHz HSFDR RFoF modules

Up to Ku band (up to and including 18GHz)

20GHz HSFDR RFoF modules

Up to K band (up to and including 20GHz)

30GHz HSFDR RFoF modules

Up to K band (up to and including 30GHz)

40GHz HSFDR RFoF modules

Up to Ka band (up to and including 40GHz)

67GHz HSFDR RFoF modules

Up to V band (up to and including 67GHz)

Optical Delay Lines Up to 6GHz

Any type of fixed or progressive ODL of up to 6.0GHz with direct modulation (L, S, & C bands).

Optical Delay Lines Up to 40GHz

Any fixed time delay between 1ns and 250μs (fixed). X, Ku, K and Ka bands).

Delay Lines (12 to 140GHz)

Models from 12 to 140 GHz. Modular design for delays from 10 ns up

HMPA & HHPA Series

Medium and High Power Amplifiers covers select bands from 20 to 100 GHz.

RCIED Jamming Antennas

Monitoring Antennas

High Power Transmit

Log Periodic Dipole Arrays (LPDA)

Switched Beam Antennas (SBA)

Low Phase Noise Amplifiers

Low Noise Amplifiers

Low Noise Figure Performance as Low as 1 dB

Ultra High Linearity Amplifiers

With IP2 performance exceeding +110 dBm

High Frequency Amplifiers

From 2 GHz to 45 GHz. Configurable without additional engineering charges

Medium Power Amplifiers

A complete line of the highest performance Medium Power Amplifiers the industry has to offer.

DF-A0052 (1- 3600 MHz)

A high-speed, 3-band, 5- to 3-channel commutating switch intended for switched elements direction finding applications.

DF-A0064 (20 – 6000 GHz)

High-Speed 4-band DF Antenna Band Switch intended for direction finding applications.

DF-A0137 (20 – 8000 MHz)

A high-speed, 4-band switch intended for direction finding applications. 20 - 8000 MHz

DF-A0239 (1 – 6000 MHz)

A high-speed 6- to 3-channel commutating switch intended for switched elements direction finding applications.

DF-A0226 (1 – 6000 MHz)

A high-speed, 4-band switch intended for direction finding applications.

DF-A0157 (20 – 6000 MHz)

A high-speed, 4-band switch intended for direction finding applications.

Cryo Attenuator

With low thermal noise characteristics and minimal self-heating, achieving temperature faster.

Coaxial Terminations

0 to 40GHz Termination，Power handling from 0.5 to 2000watts,

Powerfilm™ Chip Attenuators

RF Attenuators Up to 250 Watts, Up to 40 GHz

Powerfilm™ Flange Attenuators

Up to 250 Watts, Up to 4 GHz. Designed tovreduce power of the RF signal while generating only a small reflection even under maximum power conditions.

Pill Terminations & Attenuators

115A – 119A Manual Step Attenuators

A series of broadband, step manual attenuators in a right-angle drive configuration.

940 Continuously Variable Attenuators

Wide variable attenuation range with approximately linear calibrated dialm and rugged design.

General Purpose Bias Tees

Available in SMA, N-Type, and 7/16 DIN connector styles.

High Current Bias Tees

Quality and performance in a strandard three-port network for high current applications

Pulsed Models Bias Tees

Manufactured for maximum performance and minimal disruption.

75 Ohm Bias Tees

Quality and performance in a standard three-port network specific for 75 Ohm applications

General Purpose DC Block

DC block have a capacitors which prevent the flow of audio and direct current (DC) frequencies.

High Voltage DC Blocks

DC blocks have a capacitor in-series with the center conductor which prevents the flow of audio and direct current (DC) frequencies.

Coaxial Connectors

Waveguide to Coaxial Adapters

Waveguide Attenuators

Both fixed and variable attenuators are available in low or high power models.

Waveguide Circulators

Waveguide Circulator,WR28 to WR650,power up to 5KW. Customized frequency and optimized specifications available

Cross-Guide Couplers

Including 4 Waveguide Ports Type,3 Waveguide Ports Type and 2 Waveguide Ports+1 Coaxial Port Type

Directional Couplers

Waveguide or Coaxial coupled ports, high directivity with wide operating frequency range.

Hot Standby Couplers

Incorporate a Coupler, Antenna Interface, Radio Mounting Interfaces and Polarizers. 7 to 38 GHz, Eliminates need for flexible waveguide

Waveguide Isolators

WR28 to WR650, High power handling,From 2GHz to 40GHz,1dB BW from 0 3% to 15%.

4-port Hybrid Magic Tee

Available in all waveguide sizes, including double ridge, covering S-Band to Q-Band

Phase Combiners

WR-22 to WR-650. increasing amplifier power and security is to combine the power of two or more amplifiers.

Power Combiners

Coupling ratios may vary from symmetrical (3dB) to assymetrical. Can handle full waveguide power. Can replace magic tees

Variable Power Combiners

Rotary Joints

Standard and custom rotary joints for low or high power applications, for use in vehicle mounted self-pointing antenna systems, air traffic control towers, airborne or shipboard radar.

Waveguide Terminations

Complete range of terminations for all waveguide sizes and power levels. WR-22 to WR-650

Flexible Seamless

From WR-22 to WR-650. Non-twistable, and manufactured from a continuous length of thin walled copper/brass tubin

Flexible Twistable

From WR-28 to WR-284. The core of the waveguide consists of a silver-plated brass strip formed and helically wound around a rotating mandrel.

Bends & Assemblies

Standard line of flanged rigid straight waveguide sections, twists, and swept and mitered bends. WR-22 to WR-650

Mid-Size Coaxial Attenuators

0.5-18 Ghz . Resettability: 0.1 dB or better

Miniature Attenuators 1-18 GHz

Complete line of miniature continuously variable attenuators. Most models weigh 2 or 3 ounces and have been qualified for all types of military applications.

Broadband Phase Shifters

Model 3428 | Frequency Range: DC-4 GHz

Micrometer Driven Phase Shifters

DC-18 Ghz, Micrometer Driven

Motorized Coaxial Phase Shifter

Allow precise control of signal phase across broad frequency ranges by means of voltage control, with models available for frequency ranges up to 18 GHz.

Directly Calibrated Phase Shifters

DC-18 Ghz, Direct Reading. A very high degree of accuracy and extremely high resolution for fine tuning of phase.

Coaxial Directional Couplers

Broadband Directional Couplers, SMA Directional Couplers and Type N Directional Couplers. Frequency ranges:st 0.5 to 18.0 GHz

Miniature Hybrid Couplers

Power Dividers and Combiners

Broadband PIN Diode Switches

High-speed control of RF/microwave signals from 100 MHz to 18 GHz.

Waveguide Pressure Wondows

Waveguide to Waveguide Adapters

RF Cavity Filters

Tunable Cavity Band Reject Filters optimized performance for multiple industries, including harsh environments. 0.03 to 40 GHz

Extended Range Filters (ERF)

Combine a highly tunable interface with consistent power handling inside a modest package, fulfilling the need for a small and rugged RF filtering device.

IMF™ Filters

Integrated Microwave Filters (IMF™ Filters) Ultra-fast tuning speeds into pint-sized packaging, 1.5 GHz to 24 GHz

MAXI-POLE®

Tunable filters Band Pass Filters. Frequency Range: HF, VHF, UHF band in bandpass and band reject or notch configurations. Bandwidth: 1.9%-5.5%

MEGA-POLE®

Covers the standard frequency bands within the 30 to 450 MHz range. Designed for rugged military environments per MIL-STD-810

MINI-POLE®

Tunable filters is optimized for size, RF power handling, low distortion, and exceptional selectivity. 1.5 MHz to 700 MHz

NANO-POLE® Tunable Filters

Designed for optimal size, DC consumption, RF power handling, insertion loss, signal purity and linearity.

POWER-POLE®

Tunable Band Pass Filters. Bandwidth: 1.8%-9.5%

Ceramic Fixed Bandpass Filters

Offered in dielectric and connectorized forms, delivering superior high Q performance in a smaller sized package. Frequency Range: 0.27 to 3 GHz

Combline Filters

Combline Fixed Band Reject Filters offers high Q performance in a ruggedly designed package. Frequency Range: 500 MHz to 40 GHz

RF Helical Filters

Ideal for applications utilizing a narrow frequency range and where low insertion loss and impedance is required. 45 MHz to 3 GHz

Interdigital Filters

Frequency Range: 0.5 to 50 GHz. For variety of applications, including harsh military environments. UHF in Interdigital Bandpass Filter designs.

Lumped Element

Passive devices, smaller than the operating wavelength, to permit a wider bandwidth within compact packaging. 0.5 MHz to 10 GHz

Mixed Technologies Filters

By mixing technologies, including Cavity, Suspended Substrate, Ceramic, Lumped Components, Combline and Interdigital, we can more effectively tailor the filter design to individual applications.

Quad Flat No-Lead Package Filter (QFN)

Fulfills the current market demand for a low cost, high performance bandpass filter, Available as a 10mm unit. Frequency Range: 1.5 GHz to 24 GHz

Suspended Substrate Filters

Combine high Q factor and low-loss performance into a durable and temperature stable small package.

TE01δ Filters

Hollow waveguide resonators carry or propagate signals above a specified frequency. Frequency Range:4.3 GHz to 8.8 GHz

Thin Film Filters

Excellent temperature stability, low loss and consistent performance at a lower cost. 3 GHz to 50 GHz

Tubular Filters

Frequency Range: 100 MHz to 20,000 MHz. Bandwidth: 0.2% to 50%

Fixed Low Pass Filters

Available as narrow band filters or wideband filters, supporting bandwidths from .1% to 200%, in configurations of 2 to 18 sections

Low Pass Filters

Eliminate unwanted interference from adjacent channels by passing signals lower than a specified frequency and attenuating those in a higher range.

RF Multiplexers

Combine multiple filters to a common port to create a multi-channel module. Filters can be customized to meet lowpass, highpass, bandpass, or bandstop requirements.

RF Fixed Attenuators

DC-67GHz Fixed Attenuator，Power handling from 0.5 to 2000watts, attenuation range 0 to 80dB,

Digital Control Attenuator

up to 40GHz, attenuation from 0 to 60dB,

Waveguide Low Power Load

Waveguide Low Power Load, from WR28 to WR975, power handling from 0.25 to 50W. Good VSWR 1.05 Max. for testing purpose

Waveguide Medium Power Load

Waveguide Medium Power Load, frenqency range from WR28 to WR975, power handling from 50 to 100W.

Waveguide High Power Load

Waveguide High Power Load, from WR28 to WR975, from 100 to 5000W. VSWR 1.15Max.

2-way Power Divider

From 0.5 to 40GHz, SMA,N,2.92mm conntector are avaliable, frequency band can be customized,

4-way Power Divider

From 500MHz-40GHz, Conntector SMA,N,2 92mm are avaliable, frequency band can be customized

8-way Power Divider

From 0.5 to 40GHz, conntector SMA,N,2.92mm are avaliable, frequency band can be customized,

3,12,16, 32-way Power Dividers

ultiway power dividers(Combiner), include 3-way,12-way,16-Way and 32-way Power divider(Combiner). Conntector SMA,N are avaliable

Lumped Power Dividers

2~16w. Freq. Range from 1MHz to 6000MHz, Coaxial, surface mount, plug-in type available,

Resistive Power Dividers

Resistive Power Divider, from DC to 18GHz.

90º Hybrid Couplers

up to 40GHz, connector SMA,N,2 92mm are avaliable.

180º Hybrid Couplers

Up to 40GHz, connector SMA,N,2 92mm are avaliable

Waveguide Directional Couplers

High directivity with wide operating frequency range. Can be three waveguide ports or with one coxial connection

Coaxial Isolators

Connector SMA, N, BNC, 2 92mm or Drop-in are avaliable. Customized frequency and optimized specifications available.

Coaxial Circulators

Connector SMA, N, BNC, 2 92mm or Drop-in are avaliable. Customized frequency and optimized specifications available.

Reflective PIN Diode Switches

Reflective Type Switches, 2 to 16way, controlled by TTL, minimun isolation 60dB.

Absorptive PIN Diode Switches

Absorptive Type Switches, 2 to 16way, controlled by TTL, minimun isolation 60dB Customized frequency and optimized specifications available.

High Power PIN Diode Switches

2 to 16way, controlled by TTL, Customized frequency and optimized specifications available.

Switched Filter Banks

10 channels, 8-18GHz, can be customized according to customer requriement

Digital Phase Shifters

Right Angle Waveguide to Coaxial Adapter

Endlaunch Waveguide to Coaxial Adapter

Double Ridge Waveguide to Coaxial Adapter

Octave & Half Octave Amplifiers

Radar & Communication Amplifiers

Broadband and Multi-Octave Amplifiers

Ultra Broadband Amplifiers

Low Noise Amplifiers

Ultra Low Noise Amplifiers

Limiting Amplifiers

Designed to accept a wide range of input power levels while responding with a limited range of output power levels.

KA Band Amplifiers

Radial Power Combiners and Dividers

Radar Rotary Joints for Air Traffic Control

Standard and custom rotary joint designs available for Primary Surveillance Radar (L and S-Band PSR) and Secondary Surveillance Radar (SSR)

Space-Qualified Rotary Joints

Space rotary joint designs are qualified to: NASA & ESA Standards as well other international Space Agency Standards

Rotary Joints for Commercial Applications

Satcom RF rotary joints designs in a single, dual and multi-channel configurations with coaxial and/or waveguide interfaces.

Rotary Joints for Military Radar & SATCOM

With multi-channel integrated rotary subsystems with high power RF waveguide channes, coaxial RF channels.

SPDT Coaxial Switches

Maximum VSWR ranging from 1.1 to 1.95 with minimum isolation ranges from 55 dB to 90 dB and a max insertion loss from .1 dB to .8 dB,

Coaxial DPDT Switches

Double pole double throw with SMA or 2.9mm connectors. Failsafe or latching actuator. DC - 40 GHz. Frequency Range: DC - 40 GHz

SPnT Coaxial Switches

Single Pole Multiple Throw

DPDT High Power Coaxial Switches

High Power Coax DPDT Switch frequency: Coaxial Switches route RF signals over a broad bandwidth from DC - 12.4 GHz

High Power Coax SPDT Switches

High Power Coax SPDT Switch frequency: Coaxial Switches route RF signals over a broad bandwidth from DC - 12.4 GHz

High Power Coax SPnT Switches

High Power SP3T, SP4T and SP6T Coaxial series

High Repeatability SPnT Switches

The Reliant Switch™ series has a switching time of 15 ms and it is offered with a nominal power supply voltages of +12Vdc or +24Vdc.

High Repeatability SPDT Switches

R401 Series Routes signal to one of two outputs. Great for ATE systems. SMA connectors. 10M Cycle Life, great insertion loss repeatability, low VSWR, high isolation

SPDT Waveguide Switches

Single Pole Double Throw (SPDT) | WR-Series | 33D Series

WG Low Noise Amplifiers

Frequency ranges from 10kHz to 2.5GHz at power levels exceeding 1KW for Modules and 50KW for Systems.

WG Low Frequency Amplifiers

Frequency ranges from 10kHz to 51GHz with power levels up to 2W P1dB.

WG Broadband Amplifiers

Frequency ranges from 10kHz to 8.5GHz at power levels exceeding 1.3KW for Modules and 20KW for Systems.

WG High Frequency Amplifiers

Frequency ranges from 500MHz to 22GHz at power levels exceeding 400W for Modules and 500W for Systems.

WG Millimeter Amplifiers

Frequency ranges from 18GHz to 50GHz at power levels exceeding 40W for Modules and 100W for Systems.

WG Pulse Amplifiers

Frequency ranges from 1MHz to 18GHz at power levels exceeding 4KW for Modules and 40KW for Systems.

Broadband Endlaunch Adaptors | Series 373

1mm Endlaunch Adapters | 373 Wx Series

0.8mm Endlaunch Adapters | 373 F-Series

Broadband WG to Coax N Type Adaptors | 093-NF10 Series

WG to APC7 Coax Adaptors | 093-AP Series

WG to SMA Coax Adapters | 094-S Series

WG to K-Type Coax Adapters

WG to 2.4mm Coax Adapters | Series 093-TF/TM

WG to 1.8mm V-Type Coax Adapters | 093/094 Series

Low PIM WG to Coaxial Adapter | Series 098

High Power WG to Coax Adapters | Series 097

Compact WG to Coax Adaptors | 099 Series

020 Series

Millimetric Calibrated Variable attenuators. Models from 1.1 GHz to 500 GHz. Up to 50dB Calibrated attenuation range

080 Series

Variable Attenuators suitable for applications where calibrated attenuators are not required, Attenuation Range: 0 dB – 20 dB

081 Series

Fixed Attenuators low VSWR devices suitable for operating over the full waveguide band.

110 Series

Precision Rotary Vane Attenuators 1% accuracy 0 dB – 60 dB, 2.60 GHz to 500 GHz

113 Series

Field Useable Rotary Vane Attenuators. Attenuation Range: 0 dB to 50 dB (Optionally 0 dB to 60dB)

114 Series

Precision Direct Reading Rotary Vane Attenuators | 3% accuracy (0-40dB) / 5% accuracy (41-50dB). Attenuation Range: 0 dB to 50 dB

580/582 Series

Precision Fixed Attenuators. Attenuation Variation with Frequency Less than ±1.5 dB over full waveguide band @ 500 GHz

620/621 Series

Programmable Rotary Vane Attenuators, Models from 3.22 GHz (WR229) to 330 GHz (WR3)

624 Series

Motorised Variable Attenuators utilise the proven rotary vane principle and proven high accuracy over the full waveguide band. 8.0 GHz to 110 GHz

625-03 Series

Ethernet range of High Precision Programmable Attenuators. Models from 6.58 to 500 GHz (WG15, WR112 to WM570, WR2.2)

Metrology Calibration Kit

OOL – Offset/Offset/Load | TRL – Thru/Reflect/Line | LRL – Line/Reflect/Line

Double Ridge Calibration Kit

Series 703/708 | 2 to 40GHz | Customisable | TRL/LRL or OOL

Millimeter & Sub-millimeter Calibration Kits

Series 704/721/741 | 90 to 500GHz | Bronze, Silver and Gold Grades | NPL Technology Applied

Combiner Redundancy Units

520 Series. Efficient HPA Combining. Full Power HPA Redundancy. High Speed Switching

Multihole Directional Couplers

System & Instrument Grade. 2.6 to 40GHz

Series 230 / 231

Multihole Directional Couplers – Splitter/Combiner. 3 Wat Signal Splitter

WRD 131 Series

Double ridge multihole coupler for standard double ridge waveguide sizes and tailored to any special bandwidth requirements.

Series 140

Branch Guide Directional Couplers, available in both 3 and 4 port configurations and standard coupling values are 3 dB, 6 dB and 10 dB

Coaxial Flange to Flange Adapter

A practical alternative to flexible waveguide at millimeter wave frequencies. 33 GHz to 220 GHz

Seamless Semi-Rigid Flange to Flange Adapter

A low loss, hand formable waveguide section suitable for millimeter wave applications. 50 GHz to 330 GHz

V and E Band Diplexers

Standard and special custom diplexers designed for the demanding millimeter wave applications at both V (58 to 63 GHz) and E (71 to 76 GHz and 81 to 86 GHz) bands.

Series 280

Low Pass Filters. 40 dB Stop Band Rejection. Models Available up to 220GHz

170 Series

Short, low power terminations provide a maximum VSWR of 1.10 : 1 within a minimal overall length

171 Series

Ultra-short terminations developed for integration into systems were space is a premium.

040 Series

Precision low power terminations. Models from 1.14 GHz to 500 GHz

540 Series

Sliding Terminations to use a sliding termination when measuring low VSWR values.

101 Series

High Power Loads. 0.32 GHz to 330 GHz, Industry Leading Performance

WRD101

Double Ridge High Power Termination. Models 3.5 GHz to 40 GHz. Up to 3500 W Power Handling

100 Series

Medium Power Terminations have a maximum VSWR of 1.15:1 with the ability to absorb high RF energy levels. 3.3 to 140GHz

Series 780 OMT

Orthomode Transducers. Isolation > 50dB . Models up to 140GHz . Broad and Narrow Band Options

785 Series OMT

Full-Band Orthomode Transducers. Models from 33 to 220 GHz

Manual and Motorised Waveguide Switches

Series 333 and 333-*E | up to 330GHz | High Accuracy | High Repeatability

DC Motor Driven Waveguide Switches

Series 334-*E and WRD334-*E | Switching Time < 500mS | High Accuracy | High Repeatability

DC Operated 2-Channel Waveguide Switches

Series 336 | 2.6 to 40.1GHz | | High Speed

Waveguide Switch, PoE

Series 338 | Power and remote control Ethernet | Models up to 330 GHz | High accuracy and repeatability

Spaceflight Millimetric Waveguide Switch

Series 330 | Models up to 112 GHz | Stable performance at temperature extremes | Very low insertion loss

Compact H-plane Waveguide Switch

Series 337 | Compact lightweight waveguide switch | Models available, 24-400 GHz | Ultra-high RF & Mechanical performance

Matched Hybrid Tee (Magic Tee)

Series 385 | 2.6 to 330 GHz | Excellent balance | E-H port isolation

Un-Matched Hybrid Tees

Series 390 | 1.14 to 140GHz | High Isolation | Balanced Power Division

Matched E and H Plane Tees

Series 400 – E Plane | Series 410 – H Plane | 1.14 to 330GHz

Unmatched E and H Plane Tees

Series 420 – E Plane | Series 430 – H Plane | 1.14 to 140GHz

Waveguide Twists

Series 450 | Brass or Aluminium | Low VSWR | 2.6 to 330GHz | Twists of 45° and 90° can be supplied

Low Noise Amplifiers | HLNA Series

Active Multipliers

HAFM-Series available in models ranging from 20 to 100 GHz. Coaxial and waveguide interface versions

Passive Multipliers | HMM

HMM Series Multipliers | From 18 – 100 GHz. | Broadband frequency coverage | Waveguide output interfaces | Small, low cost

Balanced Mixers & Upconverters

HBM series of balanced mixers and the HBUC series of balanced upconverters cover the waveguide bands from 18 – 110 GHz.

Series HMID

Double Ferrite Junction Isolators available to cover 71-76 GHz and 81-86 GHz

HFBI Series

Full band Faraday-type isolators are available from WR-28 through WR-10 waveguide sizes (26.5 to 110 GHz).

PIN Diode Switches | HSW & HSWM Series

Digital Attenuator | HDA040-069 Series

Range from DC to 40 GHz in 6-bit operation. Attenuation bit values are 0.5 dB (LSB)

HVA Series

HVA Series broadband PIN Diode attenuators covers the waveguide bands from 18 to 110 GHz.

HGM & HGV Series

Gunn Oscillator and VCO’s cover the frequency range from 7 to 110 GHz. Available with either mechanical or electrical tuning.

Flanged Waveguide

HST Series available in standard or custom lengths from WR-42 through WR-5 waveguide sizes

Waveguide Bends

HEB and HHB series available in standard 90 degree configuration or by special order, 30, 45 or 60 degree configurations from WR-42 to WR-5.

Waveguide Twists

HTW series available in standard 90 degree configuration or by special order, 45 degree configuration from WR-42 through WR-5.

Precision Manual Waveguide Switches

HMSW series of precision manual waveguide 4-port switches are available from WR-42 through WR-10 waveguide sizes (18 to 110 GHz).

Crossbar Switch Matrix | CB Series

CB Series conveniently facilitates environments containing multiple test setups, eliminating the need to connect and disconnect devices.

Multiple Switch

MS-series is a switch matrix solution offering user flexibility in instances where multiple switches are required.

Non-blocking FIFO systems

Full Fan-In Fan-Out (FIFO) systems are non-blocking devices, allowing simultaneous connections between any input to any output.

Switched Matrix Multiplexer

Electomechanical multiplexer system with the capability to switch one input to as many as 143 outputs.

Solid State Switch Matrices

Reliably routing the input signal to any output port, Solid State Matrices are applicable for complex applications where multiple I/O signals increase switching complexity.