Koaxial

Broadband DC Blocks

Broadband DC Blocks

Outer DC blocks have a capacitor in-series with the outer conductor and the inner/outer types have capacitors in-series.

Reflector Antennas

Octave Horn Antennas

Multi Octave Horn Antennas

Horn Antennas

Spiral Antennas

Microstrip Antennas

Log Periodic Antennas

Discone-type Antennas

Bi-Conical Antennas

Directional Finding Antennas

dbDirect Broadband Antennas

Horn Antennas

NW346

Broadband Calibrated Coaxial Noise Sources, available in 6,15 and 23 dB ENRs

NW-MI Series

An economical and rugged manual noise instrument NW-MI series

ATE Instruments

NW-ATE Series

An economical and rugged noise instrument

RCIED Jamming Antennas

Monitoring Antennas

High Power Transmit

Log Periodic Dipole Arrays (LPDA)

Switched Beam Antennas (SBA)

Low Phase Noise Amplifiers

Low Noise Amplifiers

Low Noise Figure Performance as Low as 1 dB

Ultra High Linearity Amplifiers

With IP2 performance exceeding +110 dBm

High Frequency Amplifiers

High Frequency Amplifiers

From 2 GHz to 45 GHz. Configurable without additional engineering charges

Medium Power Amplifiers

Medium Power Amplifiers

A complete line of the highest performance Medium Power Amplifiers the industry has to offer.

DF-A0052 (1- 3600 MHz)

A high-speed, 3-band, 5- to 3-channel commutating switch intended for switched elements direction finding applications.

DF-A0064 High-Speed DF Antenna Band Switch

DF-A0064 (20 – 6000 GHz)

High-Speed 4-band DF Antenna Band Switch intended for direction finding applications.

DF-A0064 High-Speed DF Antenna Band Switch

DF-A0137 (20 – 8000 MHz)

A high-speed, 4-band switch intended for direction finding applications. 20 - 8000 MHz

High-Speed DF Antenna Commutating Switch DFA0239

DF-A0239 (1 – 6000 MHz)

A high-speed 6- to 3-channel commutating switch intended for switched elements direction finding applications.

DF-A0226 (1 – 6000 MHz)

A high-speed, 4-band switch intended for direction finding applications.

DF-A0064 High-Speed DF Antenna Band Switch

DF-A0157 (20 – 6000 MHz)

A high-speed, 4-band switch intended for direction finding applications.

Cryo Attenuator

Cryo Attenuator

With low thermal noise characteristics and minimal self-heating, achieving temperature faster.

Zysen Termination Coaxial

Coaxial Terminations

0 to 40GHz Termination,Power handling from 0.5 to 2000watts,

Powerfilm™ chip attenuators from Spectrum Control Inmet

Powerfilm™ Chip Attenuators

RF Attenuators Up to 250 Watts, Up to 40 GHz

Powerfilm™ flange attenuators

Powerfilm™ Flange Attenuators

Up to 250 Watts, Up to 4 GHz. Designed tovreduce power of the RF signal while generating only a small reflection even under maximum power conditions.

Pill Terminations and Attenuators

Pill Terminations & Attenuators

115A - 119A Manual Step Attenuators

115A – 119A Manual Step Attenuators

A series of broadband, step manual attenuators in a right-angle drive configuration.

940 Continuously Variable Attenuators

940 Continuously Variable Attenuators

Wide variable attenuation range with approximately linear calibrated dialm and rugged design.

General Purpose Bias Tees

General Purpose Bias Tees

Available in SMA, N-Type, and 7/16 DIN connector styles.

High Current Bias Tees

Quality and performance in a strandard three-port network for high current applications

Pulsed Models Bias Tees

Manufactured for maximum performance and minimal disruption.

75 Ohm Bias Tees

Quality and performance in a standard three-port network specific for 75 Ohm applications

General Purpose DC Block

General Purpose DC Block

DC block have a capacitors which prevent the flow of audio and direct current (DC) frequencies.

High Voltage DC Blocks

High Voltage DC Blocks

DC blocks have a capacitor in-series with the center conductor which prevents the flow of audio and direct current (DC) frequencies.

Waveguide to Coaxial Adapters

Apollo microwaves rotary joints

Rotary Joints

Standard and custom rotary joints for low or high power applications, for use in vehicle mounted self-pointing antenna systems, air traffic control towers, airborne or shipboard radar.

Mid-Size Coaxial Attenuators: 0.5-18 Ghz

Mid-Size Coaxial Attenuators

0.5-18 Ghz . Resettability: 0.1 dB or better

Miniature Continuously Variable Attenuators

Miniature Attenuators 1-18 GHz

Complete line of miniature continuously variable attenuators. Most models weigh 2 or 3 ounces and have been qualified for all types of military applications.

Broadband Phase Shifters

Model 3428 | Frequency Range: DC-4 GHz

Micrometer Driven Phase Shifters

DC-18 Ghz, Micrometer Driven

Motorized phase shifters

Motorized Coaxial Phase Shifter

Allow precise control of signal phase across broad frequency ranges by means of voltage control, with models available for frequency ranges up to 18 GHz.

directly calibrated phase shifters

Directly Calibrated Phase Shifters 

DC-18 Ghz, Direct Reading. A very high degree of accuracy and extremely high resolution for fine tuning of phase.

Coaxial directional couplers

Coaxial Directional Couplers

Broadband Directional Couplers, SMA Directional Couplers and Type N Directional Couplers. Frequency ranges:st 0.5 to 18.0 GHz

Broadband SPST PIN Diode Switches

Broadband PIN Diode Switches

High-speed control of RF/microwave signals from 100 MHz to 18 GHz.

Waveguide to Waveguide Adapters

Tunable Cavity Band Reject Filters

RF Cavity Filters

Tunable Cavity Band Reject Filters optimized performance for multiple industries, including harsh environments. 0.03 to 40 GHz

Extended Range Filters

Extended Range Filters (ERF)

Combine a highly tunable interface with consistent power handling inside a modest package, fulfilling the need for a small and rugged RF filtering device.

Integrated Microwave Filters (IMF™ Filters)

IMF™ Filters

Integrated Microwave Filters (IMF™ Filters) Ultra-fast tuning speeds into pint-sized packaging, 1.5 GHz to 24 GHz

MAXI-POLE® Filter

MAXI-POLE®

Tunable filters Band Pass Filters. Frequency Range: HF, VHF, UHF band in bandpass and band reject or notch configurations. Bandwidth: 1.9%-5.5%

MEGA-POLE filter series

MEGA-POLE®

Covers the standard frequency bands within the 30 to 450 MHz range. Designed for rugged military environments per MIL-STD-810

MINI-POLE® Series

MINI-POLE®

Tunable filters is optimized for size, RF power handling, low distortion, and exceptional selectivity. 1.5 MHz to 700 MHz

NANO-POLE® Series

NANO-POLE® Tunable Filters

Designed for optimal size, DC consumption, RF power handling, insertion loss, signal purity and linearity.

POWER-POLE® Tunable Band Pass Filters

POWER-POLE®

Tunable Band Pass Filters. Bandwidth: 1.8%-9.5%

Ceramic Fixed Band Pass Filters

Ceramic Fixed Bandpass Filters

Offered in dielectric and connectorized forms, delivering superior high Q performance in a smaller sized package. Frequency Range: 0.27 to 3 GHz

Combline Filter series o

Combline Filters

Combline Fixed Band Reject Filters offers high Q performance in a ruggedly designed package. Frequency Range: 500 MHz to 40 GHz

RF Helical Filters

RF Helical Filters

Ideal for applications utilizing a narrow frequency range and where low insertion loss and impedance is required. 45 MHz to 3 GHz

Interdigital Filters

Interdigital Filters

Frequency Range: 0.5 to 50 GHz. For variety of applications, including harsh military environments. UHF in Interdigital Bandpass Filter designs.

Lumped Element Filters (LC Filters)

Lumped Element

Passive devices, smaller than the operating wavelength, to permit a wider bandwidth within compact packaging. 0.5 MHz to 10 GHz

By mixing technologies, including Cavity, Suspended Substrate, Ceramic, Lumped Components, Combline and Interdigital, we can more effectively tailor the filter design to individual applications.

Mixed Technologies Filters

By mixing technologies, including Cavity, Suspended Substrate, Ceramic, Lumped Components, Combline and Interdigital, we can more effectively tailor the filter design to individual applications.

MPG’s Quad Flat No-Lead Package (QFN) Filter

Quad Flat No-Lead Package Filter (QFN)

Fulfills the current market demand for a low cost, high performance bandpass filter, Available as a 10mm unit. Frequency Range: 1.5 GHz to 24 GHz

Suspended Substrate filters

Suspended Substrate Filters

Combine high Q factor and low-loss performance into a durable and temperature stable small package.

Thin Film Filters

Thin Film Filters

Excellent temperature stability, low loss and consistent performance at a lower cost. 3 GHz to 50 GHz

Tubular Filters

Tubular Filters

Frequency Range: 100 MHz to 20,000 MHz. Bandwidth: 0.2% to 50%

Fixed Band Pass Filters

Fixed Low Pass Filters

Available as narrow band filters or wideband filters, supporting bandwidths from .1% to 200%, in configurations of 2 to 18 sections

By mixing technologies, including Cavity, Suspended Substrate, Ceramic, Lumped Components, Combline and Interdigital, we can more effectively tailor the filter design to individual applications.

Low Pass Filters

Eliminate unwanted interference from adjacent channels by passing signals lower than a specified frequency and attenuating those in a higher range.

RF Multiplexers

RF Multiplexers 

Combine multiple filters to a common port to create a multi-channel module. Filters can be customized to meet lowpass, highpass, bandpass, or bandstop requirements.

RF Fixed Attenuators

DC-67GHz Fixed Attenuator,Power handling from 0.5 to 2000watts, attenuation range 0 to 80dB,

Digital Control Attenuator

up to 40GHz, attenuation from 0 to 60dB,

2-way Power Divider

2-way Power Divider

From 0.5 to 40GHz, SMA,N,2.92mm conntector are avaliable, frequency band can be customized,

4-Way Power Divider

4-way Power Divider

From 500MHz-40GHz, Conntector SMA,N,2 92mm are avaliable, frequency band can be customized

8-Way Power divider

8-way Power Divider

From 0.5 to 40GHz, conntector SMA,N,2.92mm are avaliable, frequency band can be customized,

3,12,16, 32-way Power Dividers

ultiway power dividers(Combiner), include 3-way,12-way,16-Way and 32-way Power divider(Combiner). Conntector SMA,N are avaliable

Lumped Power Dividers

2~16w. Freq. Range from 1MHz to 6000MHz, Coaxial, surface mount, plug-in type available,

Resistive Power Divider, from DC to 18GHz.

Resistive Power Dividers

Resistive Power Divider, from DC to 18GHz.

90º Hybrid Coupler

90º Hybrid Couplers

up to 40GHz, connector SMA,N,2 92mm are avaliable.

180º Hybrid Coupler, up to 40GHz

180º Hybrid Couplers

Up to 40GHz, connector SMA,N,2 92mm are avaliable

Zysen Coaxial Isolator,

Coaxial Isolators

Connector SMA, N, BNC, 2 92mm or Drop-in are avaliable. Customized frequency and optimized specifications available.

Zysen Coaxial Circulators

Coaxial Circulators

Connector SMA, N, BNC, 2 92mm or Drop-in are avaliable. Customized frequency and optimized specifications available.

Reflective PIN Diode Switches

Reflective Type Switches, 2 to 16way, controlled by TTL, minimun isolation 60dB.

Absorptive PIN Diode Switches

Absorptive Type Switches, 2 to 16way, controlled by TTL, minimun isolation 60dB Customized frequency and optimized specifications available.

High Power PIN Diode Switches

2 to 16way, controlled by TTL, Customized frequency and optimized specifications available.

Switched Filter Banks

10 channels, 8-18GHz, can be customized according to customer requriement

Digital Phase Shifters

Right Angle Waveguide to Coaxial Adapter

Endlaunch Waveguide to Coaxial Adapter

Double Ridge Waveguide to Coaxial Adapter

Octave & Half Octave Amplifiers

Radar & Communication Amplifiers

Broadband and Multi-Octave Amplifiers

Ultra Broadband Amplifiers

Low Noise Amplifiers

Ultra Low Noise Amplifiers

Limiting Amplifiers

Designed to accept a wide range of input power levels while responding with a limited range of output power levels.

KA Band Amplifiers

Radial Power Combiners and Dividers

Air trafic control rotary joints

Radar Rotary Joints for Air Traffic Control

Standard and custom rotary joint designs available for Primary Surveillance Radar (L and S-Band PSR) and Secondary Surveillance Radar (SSR)

Diamond Antenna Space Prorgram

Space-Qualified Rotary Joints

Space rotary joint designs are qualified to: NASA & ESA Standards as well other international Space Agency Standards

Diamond Antenna Rotary Joints for Commercial

Rotary Joints for Commercial Applications

Satcom RF rotary joints designs in a single, dual and multi-channel configurations with coaxial and/or waveguide interfaces.

Rotary Joints for Military Radar & SATCOM

With multi-channel integrated rotary subsystems with high power RF waveguide channes, coaxial RF channels.

SPDT Coaxial Switches

SPDT Coaxial Switches

Maximum VSWR ranging from 1.1 to 1.95 with minimum isolation ranges from 55 dB to 90 dB and a max insertion loss from .1 dB to .8 dB,

DPDT Coaxial switches-411 series

Coaxial DPDT Switches

Double pole double throw with SMA or 2.9mm connectors. Failsafe or latching actuator. DC - 40 GHz. Frequency Range: DC - 40 GHz

SPNT Coaxial switches

SPnT Coaxial Switches

Single Pole Multiple Throw

DPDT High Power Coaxial switches-412 series

DPDT High Power Coaxial Switches

High Power Coax DPDT Switch frequency: Coaxial Switches route RF signals over a broad bandwidth from DC - 12.4 GHz

A 402 Series SPDT High Power Coaxial Switch SPDT High Power Coaxial switches-402 series

High Power Coax SPDT Switches

High Power Coax SPDT Switch frequency: Coaxial Switches route RF signals over a broad bandwidth from DC - 12.4 GHz

High Power Coax SPnT Switches

High Power SP3T, SP4T and SP6T Coaxial series

High Repeatability Coaxial SPnT Switches

High Repeatability SPnT Switches

The Reliant Switch™ series has a switching time of 15 ms and it is offered with a nominal power supply voltages of +12Vdc or +24Vdc.

SPDT High Repeatability Coaxial Switches-R401 series

High Repeatability SPDT Switches

R401 Series Routes signal to one of two outputs. Great for ATE systems. SMA connectors. 10M Cycle Life, great insertion loss repeatability, low VSWR, high isolation

Broadband Endlaunch Adaptors | Series 373

1mm Endlaunch Adapters | 373 Wx Series

0.8mm Endlaunch Adapters | 373 F-Series

Broadband WG to Coax N Type Adaptors | 093-NF10 Series

WG to APC7 Coax Adaptors | 093-AP Series

WG to SMA Coax Adapters | 094-S Series

WG to K-Type Coax Adapters

WG to 2.4mm Coax Adapters | Series 093-TF/TM

WG to 1.8mm V-Type Coax Adapters | 093/094 Series

Low PIM WG to Coaxial Adapter | Series 098

High Power WG to Coax Adapters | Series 097

Compact WG to Coax Adaptors | 099 Series

Coaxial Flange to Flange Adapter

Seamless Semi-Rigid Flange to Flange Adapter

MATCHED HYBRID TEE (MAGIC TEE)

Matched Hybrid Tee (Magic Tee)

Series 385 | 2.6 to 330 GHz | Excellent balance | E-H port isolation

Un-Matched Hybrid Tees

Series 390 | 1.14 to 140GHz | High Isolation | Balanced Power Division

MATCHED E AND H PLANE TEES SERIES

Matched E and H Plane Tees

Series 400 – E Plane | Series 410 – H Plane | 1.14 to 330GHz

UN-MATCHED E AND H PLANE TEES SERIES

Unmatched E and H Plane Tees

Series 420 – E Plane | Series 430 – H Plane | 1.14 to 140GHz

Low Noise Amplifiers | HLNA Series

Power Amplifiers | HMPA & HHPA

Active Multipliers

HAFM-Series available in models ranging from 20 to 100 GHz. Coaxial and waveguide interface versions

PIN Diode Switches | HSW & HSWM Series

Digital Attenuator | HDA040-069 Series

Range from DC to 40 GHz in 6-bit operation. Attenuation bit values are 0.5 dB (LSB)

Crossbar Switch Matrix

Crossbar Switch Matrix | CB Series

CB Series conveniently facilitates environments containing multiple test setups, eliminating the need to connect and disconnect devices.

Multiple Switch or MS Series

Multiple Switch

MS-series is a switch matrix solution offering user flexibility in instances where multiple switches are required.

Non-blocking FIFO systems

Non-blocking FIFO systems

Full Fan-In Fan-Out (FIFO) systems are non-blocking devices, allowing simultaneous connections between any input to any output.

MPG Solutions Multiplexers or MP Series

Switched Matrix Multiplexer

Electomechanical multiplexer system with the capability to switch one input to as many as 143 outputs.

High caliber Solid State Switch Matrices

Solid State Switch Matrices

Reliably routing the input signal to any output port, Solid State Matrices are applicable for complex applications where multiple I/O signals increase switching complexity.

3000 Series Manual Step Attenuator

3000 Series Manual Step Attenuator

High volume fabrication techniques, including injection molding, stamping, broaching and thick film printing ensure a uniform product.

9000 Series Manual Step Attenuator

9000 Series Manual Step Attenuator

Broadband miniature step attenuators providing excellent performance characteristics for high reliability 50 ohm systems.

Multi-Line Phase Shifters

DC-2 Ghz,. A multiline "open trough" design in which only the center conductor's length is varied to achieve phase change.